The Lemmer A-910P conventional air spray gun is designed for furniture fine finishing, auto body shops, metal fabrication shops, contractors and hobbyists. The metal gun is durable.
The pressure feed gun is used with a remote pressure pot or a transfer pump.
Spray fan width control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base and heavier exotic coatings when using the larger nozzle set. The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. The pressure feed gun is supplied with a 1.4 mm general purpose nozzle.
The pressure feed gun is used with a remote pressure pot or a transfert pump.
Spray fan width control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base and heavier exotic coatings when using the larger nozzle set. The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. The pressure feed gun is supplied with a 1.4 mm general purpose nozzle.
Features:
• Full controls
• All metal gun body
• Easy to use
• Easy to clean
Specifications:
- Requirements: 7 cfm @40psi
- PSI input (typical): 35 - 45 psi
- Fluid inlet: 3/8" NPS-M
- Air inlet: 1/4" NPS-M
- Atomization type: External conventional
Nozzle Sizes available:
- 1.1mm
- 1.4mm
- 1.8mm
- 2.0mm
- 2.5mm
- 3.0mm
